Sit-Stand-Perch - Exploring the Third Option
By Guy Osmond on 9th Aug 2017
It is ironical that perching, the ‘third way’ in the sit-stand conversation, first became topical a few decades ago during discussions about standing too much!
Historically, there have been many logical applications for perching in manufacturing environments as a way to reduce the standing time for machine operators and process personnel without the productivity loss which can arise from frequent changes between sitting and standing. You will also see perching stools in galleries and museums so that attendants do not have to stand for their entire shift. The principal benefits of perching in such situations are an open pelvic angle for better spinal posture; reduced risk of slouching thereby encouraging better breathing; quicker and easier transition to standing height which can impact productivity and, in customer-facing applications, better eye-contact with others who are standing.
There are several ways of achieving a perching posture in an office application and chair designers and manufacturers have created many innovative approaches to the topic – with varying degrees of success! This article will not be an analysis of these different approaches but I will use three office-focused designs to illustrate the diversity available and help you to make your own decisions or, at least, ask the right questions. It is quite possible that other chair promoters and manufacturers will respond with ‘why mine is best’ comments below! As always, my advice is to beware of advertising disguised as advice.
For a modern approach to the traditional ‘bus stop’ perch, the Muvman provides a simple, comfortable seat with a spring in the height-adjustable stem and a patented movable joint in the base. This allows a dynamic sitting posture with natural movement which most people find ‘surprisingly comfortable’. The only adjustment is for gas-stem height and, for stability, the base has no castors and is quite heavy.
The saddle stool concept is widely available in a range of shapes and sizes. This sort of seating is popular with dentists, podiatrists and in some manufacturing environments but less common in offices. The saddle posture allows the user to sit at, typically, 50-70% of standing height but it is important to specify a gas stem that will go high enough (this may not be the default option). For anatomical reasons, an adjustable forward tilt will usually be desirable for male users. It is also important to note that it is not easy to judge what shape saddle any individual will prefer. Over the years, we have experimented on the basis or male/female pelvis shape, buttock width and thigh girth – without arriving at any reliable conclusions! If you are purchasing for an individual, be sure to carry out a trial first and if you are buying for multiple users, choose a mixture of models. Be aware, also, that some users simply cannot live with the saddle concept.
The Capisco has been established for many years and takes a very different approach. With a suitably high gas stem, this chair offers traditional sitting, saddle-style sitting and reverse sitting (with the chair back supporting the sternum). Some employers also use these with fixed-height high desks, adding a foot ring to allow a traditional sitting posture at height. For employers who want dynamic sitting and a stylish, unique look, Capisco can be used as a single solution to the sit-perch-stand approach.
Other models, each with their own story, can be viewed on our web site here.
It is also worth considering how such models can be deployed. Many may require both a traditional chair and a perching stool/chair. Do you have enough space? Alternatively, can you provide sit-stand (or stand only) desks without a traditional chair and just the sit-perch option?
As always, it is essential to ensure that, whatever configuration you decide on is fully supported by quality training.
What our customers say
"Found the training very useful and informative and the chance to get hands on with some products was really great, thanks Stuart."
MT of Bournemouth on the Workstation Postures & Seating course